Some areas in our home deserve a bit more privacy than others. Bedrooms and bathrooms both obviously pop to mind, but if you have a window (or door, like me) in your laundry room, this may shoot to the top of your list as well.
You can ask anyone who has lived with me (male or female), I tend to run around in my underwear. A third of my clothes are in the office closet, a third are in the master bedroom, and the balance in the laundry room. This means that getting ready for my day in the morning involves an underwear clad Erin running from room to room and down to the laundry.
Now, we have a door with a very apparent window to the street in our laundry room. My 6am trompses down there in undies have most likely led to several a passerby getting an eyeful. When we renovated our laundry room just a couple of months ago, I put my thinking cap on to figure out what to do about this issue that would still allow plenty of light, but block out my buns. Enter ScotchBlue™ Painter’s Tape.
I’d thought about using a translucent cling or contact paper, but with the high moisture in this area, I figured that I better do something a bit more permanent. A little border created with the tape and some spray paint made for frosting glass was the solution. The great thing about this solution is that if I ever want to undo the ‘frost’, a little acetone will take it right off. Nice, huh?
- ScotchBlue™ Painter’s Tapein your choice of width (I used 1 1/2 here)
- Frosted Spray Paint
ONE create your desired design with ScotchBlue Painters Tape. I did just a simple thick border to let some light in. TWO cut the overlap of the tape carefully with a sharp knife to make your lines sharp and exact. THREE tape off the frame of the window to protect the rest of the door or window from the paint. FOUR spray the frosted paint, using two coats for even coverage.
I like the way it turned out! I don’t have to worry too much about bouncing downstairs in my skivvies. I could have done some much more interesting designs here, but wanted to keep the privacy as my main objective, so I kept the entire center of the window covered.
What design would you make? Would you consider doing this?